How To Make A Tile Roof Installation

Tile roof installation is a pretty elaborate and difficult task, mainly because the material itself has some great weaknesses and the sheer amount of work involved means that there are quite a lot of possibilities to get it wrong.

The most important factor when considering a tile roof installation is the fact that tiles do not have a great mechanical resistance and the fact that they do not lie flat, but overlap each other means that they are very prone to some serious damage is they are walked upon during installation. This is why walking on already installed portions should be reduced at a minimal. Scaffolding and careful planning can prove very useful to get a good quality tile roof in the end.

There isn't much I can tell about scaffolding, but I can give you at least some clues on how to develop a good plan for tile placing. The basic thing you should search for is a skylight. One large enough that allows an individual to walk through it. That side of the roof should be done last and it should be connected to a scaffold with something like a plank. This will be your access point to the roof in the final stages so in every step make sure that you access to it. Also make sure that you leave some uncovered space on the very top of the roof. This can be easily achieved as tile placing is done from down to up. That point together with the scaffolds can leave you quite a lot of place to maneuver without causing havoc and this exactly what you should be looking for.

Great care should also be given to tile transportation. Even if you get the plan right you won't realize too much if on the roof the tiles come damaged. A procedure must be established in order to properly achieve this. The best way is to segment the transportation to logical portions and see which transportation method works best for each step.

Get the overlapping right. I'm serious about this. This is probably one of the most common mistakes done by inexperienced contractors. Sometimes the best tools are the most simple ones. I remember that my father used two carved pieces of wood that would show him exactly the distance that needed to be implemented. This sort of improvisations are still quite effective and many of those old roofs are still better built than the modern ones. Now of course you may ask why there is overlapping in the first place. The reason is pretty obvious. This sort of construction blocks all the leaks and consistently proved to be one of the best techniques ever invented.

The tile installation process is pretty straightforward and rather simple, but attention is still required. Never forget that you are working in a hazardous environment and always remember to make the appropriate safety measures.

With these things in mind I hope that you will get a clean tile roof installation and that in the end the final product will prove the tiles' good reputation.

Get started with free price quotes from your local roofing contractors.

Fill out our 3-5 minute quick and easy form, and receive a free price quote on your roofing project. This process is free and there is no obligation to continue once you receive your roofing price estimate.